Join Date: Apr 2017
Location: Twin Cities, MN
Started LED conversion
With thanks to Josef15111, I bought and installed LED lights to replace the incandescent factory rear brake/turn signal bulbs. What a difference!! It just doesn't make sense to have a cool LED ribbon for the rear tail lights and still have incandescent lights for the brakes and turn signals. Even the Limited trim has incandescents. As someone else mentioned, this is 2018!!
Also, per Joe's recommendations, I've ordered the amber LED turn signal bulbs for the front. Will tackle swapping out the fogs a little later. When done, we can turn the headlight switch to the "parking lights" setting (12 o'clock on the dial) with the fog lights on and have LEDs working throughout both the front and rear.
Not sure if/when I'll do the headlights.
2018 Pacifica Touring L Plus (gas)
Built April 10, 2018 (Tuesday)
Molten silver exterior
Toffee cognac alloy interior (gray carpeting)
Advanced Safety Tech
18" tire/wheel group (Michelin Premier tires)
Spare tire kit w/tire, sealer and inflator
Mopar Lifetime warranty
Lumar AIR 80 front side window tint.
Maxpider Kagu front mats (with thanks to thread started by Chase023 in Accessories and Add Ons forum).
Alla 7443 LED brake/turn signal bulbs (with thanks to Josef15111 sticky in Electronics forum).
iJDMTOY Amber CAN-bus PWY24W LED front turn signal bulbs (credit same Josef15111 sticky).
JDM ASTAR 1200 lumens LED backup bulbs (with thanks to KorbenD in LED Replacement Lights topic of Electronics subforum).
Catizon H11 LEDs CREE for fogs (with thanks to Stop-Eject in LED Replacement Lights topic; and for his instructions).
VLED Micro LED 9011 low-beams (with thanks to Fast55 for advice on beam pattern)
Viofo A119S dash cam (have A118 on my 4Runner)