2017+ Chrysler Pacifica Minivan Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I am thinking of buying a set of 18 inch alloy for the winter (specs below), although the bolt pattern is matching, I am unsure if a centric ring (or any other acessory) is needed so it goes on perfectly, any insight is greatly appreciated!

Bolt Pattern 5-127 mm
Hub Bore: 73.1 mm
Wheel Width: 7.5 in
Offset: 40 mm
Wheel Diameter: 18 in
Backside Spacing: 5.82 in
 

·
Registered
Joined
·
233 Posts
This looks like the offset of the Town & Country/Caravan. The offset on the Pacifica is 50.8 mm, so the ones you listed will have the center of the tire 10.8 mm further out from the vehicle than the original ones were. Most people here say that this isn't any issue, but it's up to you to decide. The hub bore you have listed is also a bit larger than the ones on the pacifica, which are 71.5 mm. As I believe they use cone seats, I believe the wheels should be lug centric and not hub centric, so that shouldn't affect you.
 

·
Registered
Joined
·
1 Posts
I have the same question too. I want to buy winter wheels for pacifica 2018
Bolt Pattern 5-127 mm
Hub Bore: 71.5 mm
Wheel Width: 7.5 in
Offset: 44 mm
Wheel Diameter: 18 in
Matches anything but Offset. Can I use such wheels? Will or not hurt the wings and wheel arches?
 
1 - 4 of 4 Posts
Top