2017+ Chrysler Pacifica Minivan Forums banner

1 - 18 of 18 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter #1 (Edited)
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be $550 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
275 front splitter
275 2 side skirts
150 rear

Let us know if you’re interested or have any questions.

387132C5-4810-4170-B67E-613A9420FA9C_1521786095381.jpg 5CBCBAB3-F381-48F3-95F7-FD82F2ECCC6F_1521786052320.jpeg 6FFF4E25-58AC-46B1-B4D7-CE578CDD7C62_1521786125150.jpg
 

·
Super Moderator
Joined
·
730 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

- ABS plastic material with flexibility
- doesnt add much height
- body formed pieces to complement lines
- aligns and attaches to oem stock mount points plus tap screws to add rigidity
- 5 pc kit consists of the front lip, side skirts and rear spats

- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
Nice kit! way cheaper than the one available for the caddy I own. Great work.
 

·
Registered
Joined
·
84 Posts
that's a nice looking splitter that's well proportioned to the van and should be good for day to day driving. I had one on my WRX that stuck out 3.75" and I had to triangulate 4 tie rods on it to keep it from flexing, it did wonders on the track to pull the front end down, it got rid of the understeer issue I was having pulling out of higher speed corners. I'm guessing this one will add about 15-20lbs of front end downforce at 100mph (plus the weight of the splitter), of course there's a lot of factors, the ride height is a biggie.

Your pictures are giving me an itch to dump money into performance mods for a van, which I know is not needed, but it really looks good. I've got a new (to me) car for track days, or at least it will be by the end of the summer and countless hours track tuning it. so this years toy budget is blown, but next year....muhahahaha.
 

·
Registered
Joined
·
19 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
Is this available?
 

·
Registered
Joined
·
1 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
I am interested in purchasing the splitter
 

·
Registered
Joined
·
19 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
How do you order this? Number, website info please?
 

·
Registered
Joined
·
19 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
Interested how to order?
 

·
Registered
Joined
·
1 Posts
I'm interested, please let me know how I can go about ordering this! Thanks.
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
 

·
Registered
2020 Pacifica S
Joined
·
8 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
I was wondering were i can get these?
 

·
Registered
Joined
·
3 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
 

·
Registered
Joined
·
3 Posts
where can i buy these kits?
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
 

·
Registered
Joined
·
3 Posts
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
Hey guys wanted to gauge if anyone would be interested in a splitter kit for the Pacifica.

  • ABS plastic material with flexibility
  • doesnt add much height
  • body formed pieces to complement lines
  • aligns and attaches to oem stock mount points plus tap screws to add rigidity
  • 5 pc kit consists of the front lip, side skirts and rear spats
- Cost will be 450 plus shipping for all 5 pieces and can be purchased individually as well.

Available in black or white and can be painted to match.

Individual prices will be:
250 front splitter
250 2 side skirts
100 rear

Let us know if you’re interested or have any questions.

View attachment 31658 View attachment 31650 View attachment 31666
where can i buy these kits?
where can i buy these kits please?
 

·
Registered
Joined
·
113 Posts
Discussion Starter #16
Hey guys!

So it looks like we're back in doing these splitter kits again. There is a slight increase in the price due to packaging costs. Let us know if you're interested. Email us at [email protected]
 

·
Registered
Joined
·
1 Posts
Hey guys!

So it looks like we're back in doing these splitter kits again. There is a slight increase in the price due to packaging costs. Let us know if you're interested. Email us at [email protected]
Sent an email requesting a quote. Along with that, are these compatible with the mud flaps or does it have to be one or the other?
 
1 - 18 of 18 Posts
Top