Picked up my 2019 Pacifica S in November of 2022. This was the day after I brought it home:
![Wheel Car Tire Vehicle Window]()
![Wheel Tire Land vehicle Car Vehicle]()
I bought it because it was as close to "what I wanted" as any stock vehicle would ever come. I knew I wanted to do a few tweaks to make it mine, but I said I was in no rush to start modding again. I came from a completely modified/built 1994 Voyager. My Pacifica shares the driveway with a 2018 Grand Caravan that's also modded, so I'm no stranger to modifying minivans.
It's relatively quick, handles well, and the PUG engine has a much nicer power delivery than the non-PUG in the GC, so I figured I would just do some minor tweaks and be happy. This started with simple headlight/fog light upgrades:
![Automotive lighting Tire Vehicle Car Hood]()
![Automotive parking light Vehicle Car Automotive lighting Hood]()
Just a simple "hyper white"/"yellow" combo up front. This led to ordering some smoked LED markers:
![Wheel Car Tire Vehicle Automotive side-view mirror]()
Then just before 70k miles, the factory brakes were finally in need of replacement, so the got upgraded to Powerstop Drilled/Slotted rotors with their Z23 pads:
![Tire Wheel Land vehicle Vehicle Car]()
![Wheel Tire Car Vehicle registration plate Sky]()
Of course while doing the brakes, I ended up building a shorty intake for it as well.
![Hood Automotive lighting Motor vehicle Grille Vehicle]()
![Car Vehicle Hood Motor vehicle Automotive design]()
Parts:
3" to 4" 90° coupler.
Section of 4" exhaust pipe.
Filter.
Cut the PCV bung off the old intake and installed it into the pipe.
I've since modified the cold air duct and reinstalled it, but initial findings on back to back testing showed how terrible the factory intake was overall.
Stock intake:
Intake temps idling in traffic held consistently over 115°F, with the highest spike seeing 130°F.
Normal cruising, temps held 85-90°F.
Lowest intake temp recorded was 75°F on a long uphill pull.
New intake:
Highest recorded 92°F in traffic.
Normal cruising, temps held 55-60°F.
Lowest temp recorded was 50°F on the same long uphill pull.
So consistently lower intake temps than the factory intake.
Response is greatly improved.
Low/mid rpm power seems better with less downshifting on hills.
Knocked .3 secs off 0-60 times.
With all that done, I decided to finish the looks portion of my modding, which consisted of smoking out the rear.
![Wheel Tire Car Sky Vehicle]()
I bought it because it was as close to "what I wanted" as any stock vehicle would ever come. I knew I wanted to do a few tweaks to make it mine, but I said I was in no rush to start modding again. I came from a completely modified/built 1994 Voyager. My Pacifica shares the driveway with a 2018 Grand Caravan that's also modded, so I'm no stranger to modifying minivans.
It's relatively quick, handles well, and the PUG engine has a much nicer power delivery than the non-PUG in the GC, so I figured I would just do some minor tweaks and be happy. This started with simple headlight/fog light upgrades:
Just a simple "hyper white"/"yellow" combo up front. This led to ordering some smoked LED markers:
Then just before 70k miles, the factory brakes were finally in need of replacement, so the got upgraded to Powerstop Drilled/Slotted rotors with their Z23 pads:
Of course while doing the brakes, I ended up building a shorty intake for it as well.
Parts:
3" to 4" 90° coupler.
Section of 4" exhaust pipe.
Filter.
Cut the PCV bung off the old intake and installed it into the pipe.
I've since modified the cold air duct and reinstalled it, but initial findings on back to back testing showed how terrible the factory intake was overall.
Stock intake:
Intake temps idling in traffic held consistently over 115°F, with the highest spike seeing 130°F.
Normal cruising, temps held 85-90°F.
Lowest intake temp recorded was 75°F on a long uphill pull.
New intake:
Highest recorded 92°F in traffic.
Normal cruising, temps held 55-60°F.
Lowest temp recorded was 50°F on the same long uphill pull.
So consistently lower intake temps than the factory intake.
Response is greatly improved.
Low/mid rpm power seems better with less downshifting on hills.
Knocked .3 secs off 0-60 times.
With all that done, I decided to finish the looks portion of my modding, which consisted of smoking out the rear.
