2017+ Chrysler Pacifica Minivan Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
This may be a question that only pertains to wheelchair conversions?

Because of the conversion I do not have the stow-and-go seats. My 3rd row only has the power reclining adjustment of a few inches. Should that seat not also fold flat?

I basically have a van I can only move boxes in now? I wasn't sure if folding flat was not an option because stow-and-go gave the flat floor for moving stuff.

TIA!

John
 

·
Registered
Joined
·
332 Posts
Normally for the 3rd row the backs of the seats fold forward then the entire seat pivots backward into the floor behind the seats. So the seats go into the depressed area between the rear bumper and where they usually are. This results in a surface that is flat. Hope that explains it some.
 

·
Registered
Joined
·
15 Posts
Discussion Starter #3
I figured they should at least fold flat, but the company hasn't responded as to what they did to prevent this. Not sure why they thought it would be a good idea? :/
 

·
Registered
Joined
·
470 Posts
I figured they should at least fold flat, but the company hasn't responded as to what they did to prevent this. Not sure why they thought it would be a good idea? :/
There is a 3rd Row Seat Recline Button that is separate from the button that stows the seat.
 
1 - 4 of 4 Posts
Top