2017+ Chrysler Pacifica Minivan Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter #1
Just to add to the knowledge base - the Graco Slimfit will fit the center middle row (fwd facing) and allow the outboard seats to fold forward for rear row access.

Coming from an Ody that would allow the outboard seats to move outwards which gave significantly more room for our older Graco Nautilus (which was a significantly wider seat). The Nautilus won't allow the outboard seats to fold forward - it's just too big!

John.
 

·
Registered
Joined
·
1 Posts
No, it wont. We literally just tried it today. We have two Graco Slimfits. Even with the cup-holders folded in and seat in forward facing on 2nd row center using latch, the tilt feature does not work - The slimfit is still too wide. The only way is to squish or damage the outward seat leather. If seat is installed using roof mounted seat belt, it is even worse and tilt is completely blocked.
 

·
Registered
Joined
·
62 Posts
Discussion Starter #3
Well, we only have one Graco Slimfit and it's fully installed in the middle row center seat (yes, it's latch as any seat using the belt will screw up one of the outboard tilt). We don't have any car seats in the outboard seats.

While there is some brushing of the outboard seat leather, it isn't forceful enough to damage and the tilt for access will work.

John.
 

·
Registered
Joined
·
9 Posts
Can I put two car seats on the second row? For that configuration I will remove the center cent and access to the third row seat from the middle. Is it awkward to do so?
 
1 - 4 of 4 Posts
Top