Issues came up on my trip

Edesoto said:

Hi there,

Recently completed our first road trip (about 2,500 Kms round trip) and a couple of issues came up:
* The auto stop/start system stopped working (with a msg on the dash indicating to service it).
* Check engine light with code P0456 (very small evap leak detected). I have a scanner, tried resetting it, but it came back on after a few miles).
* Driver side sliding door tends to reopen after it has closed (minor annoyance).

It will be going to the dealership next week, anybody have any insight into any of these issues?

Thanks

Click to expand...

Welcome to the forum.

The P0456 evap leak isn't a major issue and the van can be driven without a problem; it might just pollute a little bit more until it is fixed. It took two tries to get it fixed on my van. Here is a thread to read if you are interested. Posts 41 & 46 are what the dealer did to fix the problem in my van if you are out of warranty and want to check on fixing it yourself.
https://www.pacificaforums.com/foru...ight-help-please.html?nojs=1#goto_threadtools

I agree with @Waldo that batteries should be checked since low batteries can cause some unusual problems with the van.

There might be a software update for the sliding door problem. Double check to see if there is anything that somehow got in the space under the floor. I found a pencil in that space that rolled around and made some noise but didn't affect the door opening or closing. Recently my van's driver's side sliding door has started reopening when I get in the driver's seat if the sliding door hasn't closed all the way. I assume it is movement of the van that is causing it to reopen and will have it checked when it is in next time since this is a relatively new issue. Battery is new so that shouldn't be a factor for my van.
Just saw this post about TSB 08-027-18 for sliding door issues. If you take the info with you, it might help the service department fix the problem.:smile2:
https://www.pacificaforums.com/forum/568833-post4.html

In general it is better to try a forum search for solutions and to put problems in separate threads when possible.