[Acv1081]

Ok, probably time to be done tweaking the wife’s rig, but now it’s about as setup as I can get it for the most versatile Swiss Army knife of vehicles. I drive a ram 1500, but the van can tow more kids and cargo and it’s not half bad looking either. Pretty happy with the outcome.

 

[CANADAHYBRIDGUY]

What’s with the lift ? Makes the tire openings look disproportionate . Throws whole look of van off

 

[Copac]

Good for an additional 20 HP. The lugnuts add another 2.5. The calipers double the stopping power.

 

[MarkhamNSX]

What size are the lug nuts? Do you have a link where bought?

 

[Acv1081]

What’s with the lift ? Makes the tire openings look disproportionate . Throws whole look of van off

Please feel free to contact someone else if you want any info on this or other Pacifica things… I’m not going to participate in a forum that encourages users who contribute nothing but criticism. Good luck to you all. Canadahybridguy will certainly have your answer I’m sure.

 

[Acv1081]

What size are the lug nuts? Do you have a link where bought?

20 Black 12x1.5 Closed End Bulge Acorn Lug Nuts - Cone Seat - 19mm Hex https://www.amazon.com/dp/B00JNEBMC...abc_J0J2DGT3CZNVP9YYYRR4?_encoding=UTF8&psc=1

 

[Copac]

Please feel free to contact someone else if you want any info on this or other Pacifica things… I’m not going to participate in a forum that encourages users who contribute nothing but criticism. Good luck to you all. Canadahybridguy will certainly have your answer I’m sure.

I hope it was not me. I do not hang around here much due to the hybrid from north of the border guy. He has rubbed me the wrong way. I was hoping a little humor would ease his remark.

I would not mind a small lift, just too cheap. I have bumped the underside (not the front end) a few times with the crazy stupid speed bumps they have around here.

 

[Acv1081]

I hope it was not me. I do not hang around here much due to the hybrid from north of the border guy. He has rubbed me the wrong way. I was hoping a little humor would ease his remark.

I would not mind a small lift, just too cheap. I have bumped the underside (not the front end) a few times with the crazy stupid speed bumps they have around here.

You nailed it, but I’m the one getting moderators telling me not to pick on him. I laughed at your post, I’m really not one to get my feelings hurt on the Internet, but these forums can be great if ran right and not protecting blowhards.

 

[Copac]

, but I’m the one getting moderators telling me not to pick on him.

Now you gave me a reason to hang around here more often.

I’m really not one to get my feelings hurt on the Internet, but these forums can be great if ran right and not protecting blowhards.

Agreed. This place has potential, but does need work.

 

[stop-eject]

Agreed. This place has potential, but does need work.

Do you have something specific in mind? Moderators don't have many tools or admin rights here, but we'll try.

 

[Copac]

Do you have something specific in mind? Moderators don't have many tools or admin rights here, but we'll try.

Administrators can do a good bit. Isn't Pacificadmin a forum guy, or is he from VS? Either way, He should be working with you to get things hopping. I have too many irons in the fire right now to make any meaningful recommendations., But I will try to hang around more, and pass up some ideas.

 

[stop-eject]

Pacificaadmin is VS employee. He probably has hundreds of forums to manage.

 

[Copac]

Yea, I forget the number, but it is up there. Not a reason to not be responsive to your needs.

Take this to a PM, we can discuss things better.

 

[VelvetRedAWD]

My AWD looks ok. Rides higher than fwd.

 

[2021 Sport Pac Guy]

Maaannnn, [B]Acv1081[/B] that IS one sharp looking vehicle, for a mini-van!

 

[Acv1081]

Maaannnn, [B]Acv1081[/B] that IS one sharp looking vehicle, for a mini-van!

🤣🙏🏻👍😎

 

[Acv1081]

Back in spec 👍

 

[showtm490]

Looks good. I may pick up those lug nuts to keep the black theme.

 

[Johnnyma45]

Please feel free to contact someone else if you want any info on this or other Pacifica things… I’m not going to participate in a forum that encourages users who contribute nothing but criticism. Good luck to you all. Canadahybridguy will certainly have your answer I’m sure.

But on the flip side, you don't want to be in an echo chamber forum where everyone just says "good job." You're sharing your pictures and mods, you must be open to opinions.

 

[Acv1081]

But on the flip side, you don't want to be in an echo chamber forum where everyone just says "good job." You're sharing your pictures and mods, you must be open to opinions.

Yeah I love hearing opinions…