Nice! What thickness spacers do yo have up front? Why did you run 1.5” in the back?
I opted for 1” all around and it seems to be a good fit.
I opted for 1” all around and it seems to be a good fit.
Journeys lift and larger tires, 22 AWD
- 2022 AWD Touring L, S-appearance
- JOR 2.75” spacer lift
- 245/60R20 Michelin Defender LTX M/S
Oem 20” wheels (as they’re glorious) on 245/60R20 which measure dead-on 32” inflated with full tread - though the calculated diameter is 31.6”. I arrived at this size via calculation but found out later that these are the oem size on newer 4Runner limited trucks, and are readily available.
There was some slight rubbing initially but some dremel on little 1/2” sections of bumper cover, plus a heat gun and pressure on the fender liner worked it out entirely. I am running 1.5” wheel spacers on the rear but am considering removing them. The 245 width tires likely just clear the rear shock covers. I’ll report back what I find.
Anyway, I hope you all enjoy! Clearance, baby!!
Figured I’d start a new thread and reference the old one as that was a bit of an experiment - and I hadn’t gotten around to installing the lift. Link For Reference.
1 - 2 of 7 Posts
This is what i have for wheel spacers:
www.titanwheelaccessories.com
fitment was exact and the quality is good.
1" (25mm) 5x5 Hubcentric Wheel Spacers for Jeep Grand Cherokee Wrangle
This Wheel Spacer Kit Comes with Everything Needed for a Full Installation! Specifications Vehicle Bolt Pattern: 5x5 Wheel Bolt Pattern: 5x5 Hub Bore: 71.5mm Thread Pitch: 1/2"x20 Thickness: Each Adapter Measures 1" inch Thick Vehicle Fitments THESE SPACERS WILL BOLT UP TO THE FOLLOWING V
www.titanwheelaccessories.com
fitment was exact and the quality is good.
1 - 2 of 7 Posts
