2017+ Chrysler Pacifica Minivan Forums banner

41 - 60 of 179 Posts

·
Registered
Joined
·
10 Posts
Okay, I was able to download the update, but have had no luck getting anything to install. Tried different thumb drives and still no luck. Anyone actually get this update to install?
 

·
Super Moderator
Joined
·
2,884 Posts
Okay, I was able to download the update, but have had no luck getting anything to install. Tried different thumb drives and still no luck. Anyone actually get this update to install?
You unzipped the files and are using the Blu-ray player's USB port, correct?
 

·
Registered
Joined
·
4 Posts
I also downloaded the update, unzipped (there were only 4 files in the zip file). I plugged it into the usb port next to the bluray drive and it doesn't seem to do anything. I tried re-formating the flash drive, but still nothing.
 

·
Registered
Joined
·
10 Posts
Yes, I first tried the blu-ray port and nothing happened. Also tried the media usb port and still nothing. Formated the drive using FAT32 and also tried NFTS. Unzipped directly to the drive.
 

·
Registered
Joined
·
5 Posts
Finally installed the "missing" update yesterday after some confusion.

First mistake made: expected the installation confirmation message to appear in the front console, whereas the message kept appearing on the rear screens. Figured out when my son came out to help on second try (in between I reformatted the thumb drive, removed its name and all the mess after spending quite some time on a disappointing first try).

Second mistake: Since we were about to leave for a drive, skipped installation when we finally figured out how it works. On coming back, plugged the drive back to the USB port (near the DVD) rushed to second row (car seat behind driver, so all the way around).... Nada, nothing...

Third mistake: Oops, had the DVD inside, ejected it out, plugged the USB in.. Nothing.. "Defeat is a state of mind; no one is ever defeated until defeat has been accepted as a reality." - Bruce Lee... Determined to make it work, switched off the vehicle and uconnect (opened the front door) sitting in the second row (is not as difficult as it sounds) and restarted. After a couple of tries the message popped up on the screen. Pressed the accept button. Smooth and simple from there and it took around 30 mins for the entire installation to complete.

P.S. the instruction manual provided in the site is an old one, the step to verify the version installed says you don't need to proceed if installed version is 164610. This is incorrect we are installing 17something version.

The streaming option is now available under the input selections but did not get a chance to try it out since it was getting late. Hope this post helps.
 

·
Registered
Joined
·
131 Posts
Just a question here. I noticed that a lot of you are downloading these updates on USB drives. I've also seen a few comments about Over-The_air (OTA) updates. My question is, can we update the Uconnect OTA or do we have to go to a website to download and install the update?

Thanks.
 

·
Registered
Joined
·
263 Posts
I had a 16XXXX version. Downloaded a 17XXXX version and installed it with NO problems.
 

·
Super Moderator
Joined
·
2,884 Posts
Just a question here. I noticed that a lot of you are downloading these updates on USB drives. I've also seen a few comments about Over-The_air (OTA) updates. My question is, can we update the Uconnect OTA or do we have to go to a website to download and install the update?
I believe that Chrysler has pulled the OTA update for the Pacifica since it was causing issues for some people. It's pretty painless via USB.

Does ota updated both the front radio and the rear screens?
The OTA update was just for the main Uconnect system, not Uconnect Theater. You'll have to do Uconnect Theater via USB.
 

·
Registered
Joined
·
11 Posts
Installed the RHH 17.32.14 update on our 2017 Pacifica Hybrid via USB. Miracast is now available as a streaming option and works great - screen touch is mirrored too.

Still can't get the RA4 17.11.07 UConnect update to load, however.
 

·
Registered
Joined
·
2,474 Posts
Installed the RHH 17.32.14 update on our 2017 Pacifica Hybrid via USB. Miracast is now available as a streaming option and works great - screen touch is mirrored too.

Still can't get the RA4 17.11.07 UConnect update to load, however.
Hi ckjy,

Sorry to hear about this! Please send us a PM with your VIN so I can look into this further for you.

Andrea
Chrysler Social Care Specialist
 

·
Super Moderator
Joined
·
2,884 Posts
Also odd is that my download included two files: an ISO (350mb) and a UPD (1.4gb).
That’s the new normal for Uconnect updates. Not sure why it thinks there’s a model year mismatch though.
 

·
Registered
Joined
·
3 Posts
Hello,

I have a 17 Pacifica, I downloaded and installed both the updates listed for my vin successfully, Head unit is at 17.11.07 and the theater unit has the new miracast RHH 17.32.14 update loaded.

I can see, and select the miracast card on the rear screens and on the front screen now. The "wireless" box is checked on in the streaming setting menu, but I never see the pacifica wireless network list on any device. I know the devices have functioning casting as I have used it on other things.

Any ideas? Am I missing something?
 

·
Registered
Joined
·
461 Posts
Hello,

I have a 17 Pacifica, I downloaded and installed both the updates listed for my vin successfully, Head unit is at 17.11.07 and the theater unit has the new miracast RHH 17.32.14 update loaded.

I can see, and select the miracast card on the rear screens and on the front screen now. The "wireless" box is checked on in the streaming setting menu, but I never see the pacifica wireless network list on any device. I know the devices have functioning casting as I have used it on other things.

Any ideas? Am I missing something?
Need to do wifi direct.

Sent from my SM-G930V using Tapatalk
 
41 - 60 of 179 Posts
Top