2017+ Chrysler Pacifica Minivan Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
I am getting really hung up on the thread size.... I need to order both 1" and 1.25 to make sure I get the right fitment but the thread is screwing me up. Can someone help me or point me in the right direction on where to order some hubcentric spacers for our van? Thank you in advance!

I was looking at these but think the thread is wrong...Ugh!

1"
https://www.amazon.com/gp/product/B01MR71IND/ref=ox_sc_act_title_2?smid=A23ID4AZTDBV78&psc=1#

1.25"
https://www.amazon.com/gp/product/B00ED4XU2Y/ref=ox_sc_act_title_1?smid=A23ID4AZTDBV78&psc=1
 

·
Registered
Joined
·
302 Posts
I used to have some 1.50" ones on mine and was only able to find the 100% correct fitment in custom ordered ones (which are big $$$). You can use most Jeep ones that have the same bolt pattern (5x5...or 5 x127) with a 71.5 center bore. The mismatch comes with the stud thread, which is M12x1.5 on our vans. I just used the spacers with the 1/2-20 threads as there is basically very little difference. you just need to use M12x1.5 nuts to hold the spacers on to the hub then 1/2"-20 lug nuts to hold the wheel. hope this helps. What wheels do you have and what fitment are you looking for ? On mine, with the factory 18's, the 1.5" spacers made the tires poke ever so slightly.

https://www.ebay.com/itm/5X5-WHEEL-SPACERS-HUBCENTRIC-1-5-INCH-38MM-FITS-ALL-07-JEEP-JK-WRANGLER-5X127/132447705047?hash=item1ed67f97d7:g:8w4AAMXQrhdTRjfs:sc:USPSPriority!34207!US!-1:rk:4:pf:0

This was the van with the 1.5" spacers.

 

·
Registered
Joined
·
31 Posts
Discussion Starter #3
I’m working with some 56 offset wheels. 20x8 off a Durango RT... They look great but have the slightest rub in the back wheel wells.. running the stock RT 265/50/20
 
1 - 5 of 5 Posts
Top