2017+ Chrysler Pacifica Minivan Forums banner
1 - 20 of 20 Posts

· Registered
2020 Chrysler Pacifica Limited
Joined
·
157 Posts
Discussion Starter · #1 ·
This morning I test fit a couple of Jeep wheels on my Pacifica for the wheel vendor who sold me my Dodger Durango R/T (2496) wheels. He sent them to me with my new wheels to try out for him. The first one is a gray Jeep 9214 wheel. The second one is a polished Jeep 9212 wheel. Both are 20 x 8 and have 56.4 mm offsets. The 9214 is lighter and has more caliper clearance, although both wheels cleared the front caliper. These would offer a few more OEM wheel options for Pacifica owners in addition to the 2496 R/T wheels. Here are some pictures.

Jeep 9214 wheel
43806

43807


Jeep 9212 wheel
43808

43809
 

· Registered
2020 Chrysler Pacifica Limited
Joined
·
157 Posts
Discussion Starter · #3 · (Edited)
BTW the vendor I purchased my new wheels and tires from has three sets of the Jeep 9214 wheels available. One has been powdercoated gloss black. Another is done in PVD black chrome. And the third set is finished in PVD chrome. I'd love to see what a set of these look like on a Pacifica.
 

· Registered
2020 Chrysler Pacifica Limited
Joined
·
157 Posts
Discussion Starter · #7 ·
Check those out
Jeep srt wheels
Those look nice! I'm wondering if they are reproduction wheels though. OEM Jeep SRT wheels are 20 x 10. That's two inches wider than the OEM Durango R/T wheels on our van. Some of the SRT reproduction wheels I have seen are 20 x 9. My guess is that OEM SRT wheels would stick out past the vendors on a Pacifica.
 

· Registered
2017 Chrysler Pacifica Touring L Gas
Joined
·
27 Posts
Those look nice! I'm wondering if they are reproduction wheels though. OEM Jeep SRT wheels are 20 x 10. That's two inches wider than the OEM Durango R/T wheels on our van. Some of the SRT reproduction wheels I have seen are 20 x 9. My guess is that OEM SRT wheels would stick out past the vendors on a Pacifica.
Let me see if the wheels have a badge inside
I think they are own but I will check
 

· Registered
2017 Chrysler Pacifica Touring L Gas
Joined
·
27 Posts
Servus, habe deine Felgen entdeckt und bin total begeistert, gefallen mir mega gut! Kannst du mir verraten wie ich danach suchen muss?? Ich finde nichts... hast du sie eingetragen? Vielen Dank im Voraus für deine Hilfe!!
Moin
Ich kann dir absolut nichts dazu sagen
Ich mach mal Bilder und versuche nen Hersteller ausfindig zu machen
Mail mir mal
[email protected]

deniz
 

· Registered
2020 Chrysler Pacifica Limited
Joined
·
157 Posts
Discussion Starter · #16 ·
Question: What lugs are being used? I recently bought a set of grand Cherokee wheels but discount tire would not put em on because they said the lugs were a different size
I used the OEM Chrysler Pacifica lug nuts on the Durango wheels on our Pacifica . I haven't had any issues with them. I would think the GC wheels would be the same as the Durango wheels, but I'm not certain.
 

· Registered
2020 Chrysler Pacifica Limited
Joined
·
157 Posts
Discussion Starter · #19 ·
Do you have plenty of clearance? I'm thinking of running 265/50/20's on 20" Grand Cherokee rims. The tires are .7" wider and .7" taller than stock 245/50/20.
Yes. But the car sits up about a half inch higher than stock because the side walls of the tires are taller. When open the liftgate actually barley touches the bottom of the garage door when it is open now. It didn't before I put on the wheels with the larger 255 tires. I had to add some padding to the back of the garage door to keep it from scratching the car. I think there are a couple of people on the forum with Durango wheels running the Durango size tires on their Pacifica. I just think those size tires are too big and heavy for the Pacifica and would raise the height of the vehicle even more.
 

· Registered
Joined
·
8 Posts
Good afternoon,
Has anyone found a work around the Pacifica Hybrid spare tire situation? I personally consider the price of the Chrysler option to be an example of corporate extortion and won't participate in such abuse. It seems to me that if the correct wheel size can be used to purchase a salvaged or aftermarket wheel the Verestein tire might be obtained separately hopefully at a reasonable price. The Vedrestein tire, 165/80 17 101P appears unavailable with online search. Has anyone found this tire alone available anywhere? The correct wheel for the collapsible compact spare is 17.5.127 x 6.5 with setback 40mm rather than the 50.8 setback on the standard wheel.
If any of these parameters are not correct please point out the correct data. A secondary option is to mount a very low profile standard tire on the salvage rim, giving up maybe 2-3 " of additional increased storage diameter but reducing the price dramatically and live with the greater storage requirement. All thoughts and especially practical experience are solicited.
Thanks, and all the best,
CLR
 
1 - 20 of 20 Posts
Top