[minivanmama]

Unsure how, but the front camera lens on my 2018 touring plus is cracked and the view is just blurry. It’s not a huge deal but I don’t want condensation getting inside and wrecking more things and I like thing to work does anyone know if it’s possible to just replace the lens? If that’s not possible, how difficult/expensive is it to replace the whole camera? Thanks!

 

[CANADAHYBRIDGUY]

Are all the other angles blurry or just the front ? And I’m assuming this is the one , the bracket is also not part of the part as it’s a separate purchase as well .

If the front is blurry odds are debris made impact with it and shattered the lens . If your going to replace the unit also purchase the bracket because if you snap the bracket your” sol “ when you have the whole assembly off

 

[minivanmama]

Are all the other angles blurry or just the front ? And I’m assuming this is the one , the bracket is also not part of the part as it’s a separate purchase as well . View attachment 50720 If the front is blurry odds are debris made impact with it and shattered the lens . If your going to replace the unit also purchase the bracket because if you snap the bracket your” sol “ when you have the whole assembly off

Yup it’s just the one, looking at it I can tell it is shattered. I suppose it’s the risk you take purchasing a vehicle that has a camera in the direct line of possible flying debris

 

[minivanmama]

Are all the other angles blurry or just the front ? And I’m assuming this is the one , the bracket is also not part of the part as it’s a separate purchase as well . View attachment 50720 If the front is blurry odds are debris made impact with it and shattered the lens . If your going to replace the unit also purchase the bracket because if you snap the bracket your” sol “ when you have the whole assembly off

Have you had any experience or know where am assembly diagram would be for this. It appears I’m the first haha, I can’t seem to find someone who has done this

 

[CANADAHYBRIDGUY]

There should be a housing that seats around the unit , the housing removes and then the unit is held on by fasteners and is a plug and play with a dedicated harness connector

 

[CANADAHYBRIDGUY]

Ops my bad , that’s acc in the fascia . Your going to have to remove the top shroud cover for the front to get at it, this will give you a better idea

https://f01.justanswer.com/tim37857/8150ef01-ea71-4fff-a000-3d40e9ace7b9_0828-pacifica-Front_Bumper_Fascia_-_Removal_and_Installation_(Front_Bumper_Cover___Fascia)_-.pdf