2017+ Chrysler Pacifica Minivan Forums banner
1 - 11 of 44 Posts

· Registered
Joined
·
1,684 Posts
Pretty sure you can replace just the rubber inserts...
 

· Registered
Joined
·
1,684 Posts
So I looked at mine, what the dealer told you is BS.

I'm not sure who makes those wiper arms, but they are the same exact arms that are on my Lexus, and the same exact arms that were on my Kia Sedona. So, they're clearly made by some third party company.

Here's a picture of the wiper arm:



These inserts are definitely replaceable, I just bought new inserts from Lexus for them for my LS and replaced them, its very easy.

I would try another Chrysler dealer, or get the sizes and see if you can buy them online from a Lexus parts source (if they have vehicles with the same sizes)

The inserts cost me like $6 from the Lexus dealer.
 

· Registered
Joined
·
1,684 Posts
I will say, I have tried every rubber insert out there and every wiper blade out there, no blades work as well as those OEM blades.

The blades have two metal strips that slide out of the old insert and into the new insert to give it the rigidity to go back into the arm. The inserts come floppy and loose. I don't think just any insert will work.
 

· Registered
Joined
·
1,684 Posts
FWIW, over the many years, I have noted that replacing only the rubber insert frequently (but not always) is unsatisfactory. Apparently the metal carrier wears at the flip-flop pivot and the blade then fails to perform that task, leaving me with poor visibility in the rain. My personal safety is more important than a few dollars every six months.

Buy from Walmart if you want to save money. They have a pretty good selection across the price/quality spectrum.

I have replaced the rubber inserts in these specific wiper arms many, many times and have never experienced any issues.

"The metal carrier wears at the flip-flop pivot", I"m not sure what you're talking about.

There is no "flip flop pivot", these are simple J lock wiper blades, all the wiper arm is is a metal frame, that metal frame doesn't wear out, not does it "flip flop" or "pivot"

The bottom line is these wiper blades are really excellent. I've tried them all, PIAA, BOSCH, Michelin, Trico, Valeo, Rain-X on and on and every time I come back to these blades that come OEM on the Pacifica.
 

· Registered
Joined
·
1,684 Posts
Amazing that you have had the need to six (and on and on) wiper blades on your 2017 Pacifica.

Anyway, you're right. These newer blade holders are tighter than they used to be. The looseness was designed in to allow the blade to change direction on each sweep.
You miss what I said earlier on. These wiper blades are not made by Chrysler, they are a third party manufacturer. They are the exact same wiper blades that I had on my 2010 Lexus ES350, 2013 Lexus GS350, 2015 Lexus LS460 and 2017 Lexus LS460L as well as my 2015 Kia Sedona. So, while I've only replaced the blades on the Pacifica once I have replaced them on those other cars many times. The blade arms and the blades themselves are identical with all the same markings, etc.
 
  • Like
Reactions: Neogeo

· Registered
Joined
·
1,684 Posts
You'll find that they won't last the way the OEM ones do, start skipping, etc.
 

· Registered
Joined
·
1,684 Posts
Bump. One user claimed that the wiper blades were identical to the ones on their Lexus, but never heard back about a refill swap result. Anybody have any options for a ** REFILL? **
They are totally identical. I've swapped the refills many times.

The Pacifica has a 26" driver wiper and a 20 inch passenger wiper. Same size wipers as a 2010-2018 Lexus GX460. So, stop in to a Lexus dealer and buy wiper inserts for a 2010-2018 Lexus GX460 and you'll have your inserts. $7.50 each.

OR, order online:

Driver: https://www.discountpartsmonster.co...0NjAmeT0yMDE4JnQ9bHV4dXJ5JmU9NC02bC12OC1nYXM=

Passenger: https://www.discountpartsmonster.co...0NjAmeT0yMDE4JnQ9bHV4dXJ5JmU9NC02bC12OC1nYXM=
 

· Registered
Joined
·
1,684 Posts
The refills are very easy to replace, not difficult at all.
 

· Registered
Joined
·
1,684 Posts
Big thanks. I was able to get the rubber parts from Lexus and it was a breeze to replace. Chrysler full blade housing costs $35 for driver and $45 for passenger for some odd reason. Paid $20 at Lexus.
No problem! Glad it helped!
 

· Registered
Joined
·
1,684 Posts
Yeah just for grins I tried all the new blades again last month on the Pacifica and nothing was as good as the OEM Blades.
 
1 - 11 of 44 Posts
Top