2017+ Chrysler Pacifica Minivan Forums banner

Adding roof rack

18K views 16 replies 11 participants last post by  BriPac  
#1 ·
Curious if anyone had added the OEM roof rack after buying? My 2022 Limited hybrid wasn't available with the rack from the factory. Looking online it appears I would need to drill into the roof to attach so curious if others have done this.
 
#2 ·
I was able too, but I have an ICE. You could pop off the plastic cover along the roof, that is where the mounting bosses will be, I think you would have them, but I don't have a hybrid to verify. Had a junk yard pull some roof rails off a wrecked Pacifica. The install was pretty straight forward. Mopar sells an aftermarket kit that has all the bits.
 
#7 ·
Here's an old thread with some pointers for installation. (Part numbers might be old, but you might find a junk yard one anyway.)
 
#6 ·
Wow hard to believe a Limited wouldn't automatically have one. Check Ebay all over the U.S, there are many wrecking yards with wrecked Paci's that part them out..
 
#12 ·
Between 5:20 and 5:30 in the video looks like he snaps it in place.

Again, if I recall correctly, in the new part the bolts seemed to be coated with threadlock.

I'm all for getting used (but good condition) parts and did so for the center console and a third cross bar (to spread out load a bit - there is discussion about this somewhere on the forum), but for the roof rack I chose to go the new route.