[AtlanticaPacifica]

There is actually jack point arrows beside front lower cladding . And word of advice for jacking or Jack stands . Utilize body seam lines by Jack point positions , as ultimately they are the strongest points for support .

Thanks CanadaHybridGuy, are there arrows on the cladding for location #2? I found the arrows and utilize location #1 for jacking

 

[AtlanticaPacifica]

Jack it up same location utilizing body seam welds under rear pass doors furthest point back wore the rear tire . Just follow the seam of underside body lines .

I jack the vehicle using the #1 locations (body seams). Trying to learn what the #2 locations are

 

[AtlanticaPacifica]

What are you lifting it for? If just for oil changes, I highly recommend ramps - I used to use jacks and stands but once I bought ramps I'll never go back. Just don't forget to chock your rear wheels

Ramps would be great, unfortunately it would hit overhead garage door. Also ramps disallow work that requires wheel removal.

 

[AtlanticaPacifica]

My interpretation of that picture is that location #2 are the tires themselves. It looks like the black outline is around the tire contact patch.

Not a good place for jack stands, unfortunately.

I think you're right, thank you